Tail Lights

Tail Lights

Stop/Tail/Turn Light (made by Grote)
5-in-1 lamp: stop, tail, turn, reflector and license. Class A flat back. Made for rear mounting on RV's and mobile homes. Has high-hat for full side lighting.
Our Part No	Makers Part No	Description	Click for larger picture
55-8451	50762-5	5-in-1 Light
55-8454	90602	Lens

#91 Series Lights (made by Bargman)
Light features Class A reflex reflectors, a snap-tab to hold lens securely, built-in drain holes and a quick-connect
Our Part No	Makers Part No	Description	Click for larger picture
55-9139	34-91-004	License/Stop/Turn/Taillight/Bracket w/Back-up
55-9084	34-91-713	Lens for 34-91-004
55-8389	34-91-008	License/Stop/Turn/Taillight/Bracket w/o Back-up
55-8393	34-91-708	Lens for 34-91-008
55-8387	34-91-006	Stop/Turn/Taillight/Bracket w/o Back-up
55-9083	34-91-012	Lens for 34-91-006
55-9138	34-91-002	Stop/Turn/Taillight/Bracket w/Back-up
55-8392	34-91-704	Lens for 34-91-002

#86 Series Marker Wrap Around light (made by Bargman)
These 90° wrap-around lights meet lighting requirements for side markers and clearance lights double as Class "A" side-reflex reflectors. Moulded sockets with 2 wires protect bulbs from road shock and the moulded grommet protects the wiring. 5¾" x 4⅜" x 2 ³/₁₆"
Our Part No	Makers Part No	Description	Click for larger picture
55-9043	30-86-203	Amber Light
55-9042	30-86-202	Red Light
55-9044	34-86-711	Red Lens
55-9045	34-86-712	Amber Lens

#84 Series Lights (made by Bargman)
Double and triple lights are available for horizontal mounting. Talc-filled polypropylene bases are impervious to UV weather exposure. Meets DOT photometric requirements and SAE spec. Bulbs are mounted firmly in J-slot bayonet sockets for dependable flicker-free operation
Our Part No	Makers Part No	Description	Click for larger picture
55-8439	34-84-008	Double Horizontal Light
55-8438	34-84-009	Triple Horizontal Light
55-8437	34-84-509	Triple Vertical Light
55-8497	34-84-010	Red S/T/T Replacement Lens
55-8498	34-84-016	Amber Turn Replacement Lens
55-8499	34-84-711	Vertical Centre Lens
55-8500	34-84-711	Horizontal Centre Lens

#92 Series Taillights (made by Bargman)
Radius style surface-mount red taillights. Acrylic lens. Automotive style sockets with attached 16 gauge supply and ground wire. Suitable for mounting on contoured surface 8⅝" long x 4⅝" wide x 2⅛" deep.
Our Part No	Makers Part No	Description	Click for larger picture
55-8243	34-92-001	Taillight
55-8248	34-92-012	Lens, Taillight
55-8244	34-92-002	Taillight w/Backup
55-8247	34-92-704	Lens Taillight w/Backup
55-8245	34-92-003	Taillight w/License Bracket
55-8249	34-92-708	Lens, Taillight w/License Bracket
55-8246	34-92-004	Taillight w/Backup & License Bracket
55-8250	34-92-713	Lens Taillight w/Backup & License Bracket

Surface Mount Lights (made by Grote)
All the advantages of the Versalite III combined with a 2-lamp module. For installation on vehicles with a restricted mounted area. Tail, turn, stop, back-up and reflector, license lamp.
Our Part No	Makers Part No	Description	Click for larger picture
55-8458	51342-5	Triple Light
55-9794	51242-5	Double Light
55-8461	90752-5	Red Reflector and Backup Lens
55-8460	90742-5	Red Lens

Recessed Mount Lights (made by Grote)
For installation on vehicles with a restricted mounted area. Tail, turn, stop, back-up and reflector, license lamp.
Our Part No	Makers Part No	Description	Click for larger picture
55-8455	51342-5	Double Light Right Hand
55-8456	51242-5	Double Light Left Hand
55-8457	51102	Triple Light
55-8461	90752-5	Red Reflector and Backup Lens
55-8460	90742-5	Red Lens

Over 80 Taillight (made by Wesbar)
Over 80 taillights are designed for wide trailers. Features quick connect/disconnect wiring and performs six functions. Left hand includes license plate illumination. Includes integral rear clearance light 6¼" x 5" x 5
Our Part No	Makers Part No	Description	Click for larger picture
55-9760	3022	8 Way Left Hand
55-9761	3072	7 Way Right Hand
55-9276	3335	Large Lens
55-9781	3342	Small Red Lens
55-9782	3343	Small Amber Lens

Deluxe Taillight (made by Wesbar)
Features quick connect/disconnect wiring. Six function: taillight, turn light, stop light, side marker light, rear and side reflectors. Left hand model includes license plate illuminator. Includes 1 extra hot connection on each light. Two ¼" dia mounting studs on 2" centres.
Our Part No	Makers Part No	Description	Click for larger picture
55-9758	3021	7-Way Left Hand
55-9759	3071	6-Way Right Hand
55-9276	3335	Large Lens

Waterproof Low Profile Tail lights (made by Wesbar)
Fully sealed waterproof lights are perfect for boat or snowmobile trailers. Seven basic functions. 15" pigtails included. Left hand light has built in license plate illuminator. 8" long x 2⅞" wide x 2¼" deep.
Our Part No	Makers Part No	Description	Click for larger picture
55-9766	3026	Left Hand 8-Way
55-9767	3076	Right Hand 7-Way
55-9768	3336	Lens (Tail & Side)

Waterproof Capsule (made by Wesbar)
This heat and impact resistant waterproof capsule protects the bulb and electrical contacts from corrosion cause by water immersion. Use with #55-9766 and #55-9767 (the product above)
Our Part No	Makers Part No	Description	Click for larger picture
55-9973	3348	Waterproof Capsule

Waterproof Taillights (made by Wesbar)
Multi-function submersible lights protect bulbs and contacts during launching and loading. Multi-functions: taillight, turn light, stop light, side marker light, rear and side reflex reflector.
Our Part No	Makers Part No	Description	Click for larger picture
55-9762	3023	7 Way Left Hand
55-9763	3073	6 Way Right Hand
55-9764	3024	Left Hand over 80", 8 Way
55-9765	3074	Right Hand over 80", 8 Way
55-9276	3335	Large Lens

Sealed Stop, Turn & Taillight (made by PM)
Lexan™ housing and lens are permanently sealed to eliminate corrosion. Vibar™ socket cushions bulb from road shock. Includes lamp, grommet, and plug
Our Part No	Makers Part No	Description	Click for larger picture
55-8009	426-KR	Red Kit 1/pack

Sealed Stop, Turn & Taillight (made by PM)
Lexan™ housing and lens are linear welded to provide a permanent seal. Use in the vertical or horizontal position. Includes lamp, grommet, and plug
Our Part No	Makers Part No	Description	Click for larger picture
55-8010	421-KR	Red Kit

Combination Taillight (made by PM)
Moulded housing and lenses with bronze contacts include leads wire and 2 extra plug-in connections for hooking up other lights.
Our Part No	Makers Part No	Description	Click for larger picture
55-8111	V440L	With License illumin
55-8110	V440	Without License illumin
55-8113	440-15	Replacement Lens
55-8114	55-15R	Red Side Light Lens

Surface Mount #457 Combination Taillight (made by PM)
Exceeds 12 square inches of luminous lens area. Approved for vehicles over 80" wide. Features license illuminator and built-in license plate bracket.
Our Part No	Makers Part No	Description	Click for larger picture
55-8047	M457L	Light With License illumin
55-8048	M457R	Light Without License illumin
55-8052	B457-15	RH Lens
55-8058	B457L-15	LH Lens
55-8069	457-09	Mounting Bezel

VIBAR™ Flush Mount Stop, Tail and Taillight (made by PM)
Features heavy gauge steel housing with black powder-coated finish. VIBAR™ socket cushions bulb from road shock.
Our Part No	Makers Part No	Description	Click for larger picture
55-8005	425	Red Kit

Pedestal Mount Turn Signal (made by PM)
Plastic housing with black enamel finish. Gasket seals out dust and moisture. 4¼" lens retained by snap ring. Hollow mounting bolt requires ⅞" hole.
Our Part No	Makers Part No	Description	Click for larger picture
55-8006	V410R	Turn Signal

Surface Mount Universal Stop, Turn & Taillight (made by PM)
3¾" diameter wrap-over lens retained by two screws. Dust tight and watertight. Plastic housing with black finish. Includes 10" lead wires. License illuminator.
Our Part No	Makers Part No	Description	Click for larger picture
55-8049	V428	Red Kit
55-8051	V420-15	Lens (sold 2 per card)

Trailer Light Kit (made by Grote)
Kit includes right and left tail lamps (stop, tail, turn, rear reflector, side marker light, license light), plus 4' trunk and 25' trailer harnesses, license bracket, hardware and instructions. Meets all legal requirements for trailers under 80" wide. Permanent mount.
Our Part No	Makers Part No	Description	Click for larger picture
55-8470	65190-5	Trailer Lt Kit
55-8472	50532-5	Taillight & License
55-8473	50542-5	Taillight
55-8474	90342-5	Lens
55-8475	91152-5	Side Lens

Trailer Light Set (made by Bargman)
Permanently in mounds to trailers, boats, RV's and snowmobiles over 80" wide. Includes hardware, 2 combination tail-lights, (one with license bracket), 2 side marker clearance lights.
Our Part No	Makers Part No	Description	Click for larger picture
55-9785	34-16-360	Light Kit

Guide Lights (made by Bargman)
Light up the back end of your coach so you can back into or out of your campground site at night. Uses high density halogen and bulbs - 50 watt, 12 volt, 3.91 amp. Cut-out: 6" x 6¾".
Our Part No	Makers Part No	Description	Click for larger picture
55-9273	GLO-101	Guide-Lites (2 per box)

Towing Lights (made by Custer Products)
Features brake signals, turn signals, taillights, and emergency flashers all in one. Twelve volt system connects to any standard automobile lighting system in minutes. Attaches with magnetic base.
Our Part No	Makers Part No	Description	Click for larger picture
55-2873	ATL20-A	Towing Lights (2 per pack)

Towing Lights (made by Custer Products)
Easy mountable hinge flaps hook into the trunk of your car. Includes 20' wiring harness with plug. Durable, non-scratch plastic flaps easily remove from vehicle in tow
Our Part No	Makers Part No	Description	Click for larger picture
55-2881	EZT208	Flap-Mount Towing Lights (2 per pack)

Sealed Back Up Light Kit (made by PM)
Lexan™ lens and housing is linear welded to provide a permanent seal. VIBAR™ socket protects the bulb from road vibration. Includes lamp, grommet and plug.
Our Part No	Makers Part No	Description	Click for larger picture
55-8007	415-K	Back Up Light Kit

Sealed Back Up Light Kit (made by PM)
Lexan™ lens and housing is linear welded to provide a permanent seal. Use vertically or horizontally. VIBAR™ socket protects the bulb from road vibration. Includes lamp, grommet and plug.
Our Part No	Makers Part No	Description	Click for larger picture
55-8008	416-K	Back Up Light Kit

Bumper/License Light
White plastic lens with chrome lens cover. Lens is 1½" diameter
Our Part No	Makers Part No	Description	Click for larger picture
55-9604	430WD	Bumper/License Light

VIBAR™ License Light (made by PM)
Lexan™ housing and lens provide protection against damage while all internal parts are stainless steel or brass. VIBAR™ socket protects the bulb from road vibration.
Our Part No	Makers Part No	Description	Click for larger picture
55-8011	M436B	License Light

License Light and Bracket (made by Bargman)
Thermoplastic body. Light can be purchased with or without bracket. Two wire construction. Shock mounted socket with wedge base bulb. 2⅝" Long x 3⅞ Wide x 1⁹/₁₆" deep.
Our Part No	Makers Part No	Description	Click for larger picture
55-9786	30-62-001	Light with Bracket
55-9922	30-62-101	License Light
55-9923	30-62-030	Bracket